Reliabilt: Detroit Diesel Remanufactured Products – 2010 Core Acceptance Guide

Reliabilt Product – General Core Acceptance

Reliabilt® DD 15, Series 60, MBE 900, and MBE 4000 engine components and remanufactured engine assembly cores require nothing more than a simple visual inspection

1. Core condition can be accurately assessed at the point of sale
2. Eliminates costly and untimely bill backs for unacceptable core charges
3. Either full credit or no credit, partial credit for engine assemblies, cylinder heads, DPF’s and turbos

Reliabilt “No Hassle” Core Acceptance Policy

Generally, any condition core is acceptable providing it is in same condition that it was removed from the engine. However, cores may be rejected for any of the following reasons:

• The core has sustained damage due to non-operational causes such as rust, saltwater corrosion, rough handling, improper removal or excessive heat or fire.
• The core has been welded or brazed in the field.
• The core has been disassembled or is incomplete.
• The core has sustained damage in shipment. Returning the core in the same carton or engine skid that it was received in is highly recommended.
• Unless otherwise noted, cores are credited on a like-for-like basis.

NOTE : Engines MUST be drained of all fluids including pressurized fluid lines. Engines received that are not drained of all fluids will be penalized $50.00

Core Acceptance Criteria Warranty Parts

Contact your warranty administrator for information regarding warranty core returns.

Please refer to the PDF below for more information.