G2.8 and G2.9 Injector Identification

December 16, 2014

As of January 1, 2015 a running change has been made to the way Alliant Power’s G2.8 and G2.9 injectors are labeled and identified. All identification needs for warranty or application data are now covered by two numbers that are laser etched onto the nozzle nut. When filing warranty claims it is only necessary to record the serial and AP part number that is etched onto the nozzle nut. Warranty or application data acquired from prior product must be identified by the numbers on the spool valve coils as done in the past. Refer to Alliant Power Technical Bulletin’s APTB 06/11 and APTB 03/06 R1 for proper identification of product produced prior to this change.

Jimmy Finch

Dallas Branch Manager, M&D Distributors

Jimmy Finch has over 33 years of experience in Diesel Engine Sales, Service and Repair. His experience started early in life at Texas Fuel Injection Service (an early acquisition of M&D) as a job with a means to an end. Somewhere in that 33 years this job turned into a fulfilling career. He started in the injector clean up department and has held practically every position leading up to his current role as Branch Manager of the Dallas, Texas location.

In his spare time, Jimmy enjoys spending time with his wife of 24 years, Priscilla. They are currently getting ready to make their way into the empty-nesters stage of life. He also enjoys the occasional hunting trip with friends and family and chasing down potential customers by the names off their trucks.

Leave a Reply

Your email address will not be published. Required fields are marked *

By posting a comment, you acknowledge and agree to M&D's terms and conditions.

Diesel Engine Parts

for Your Diesel Engine's Needs