AP66992 & AP66995 Remanufactured G2.9 BANG Injectors

February 10, 2014

Alliant Power is pleased to offer the below Remanufactured G2.9 BANG Injectors at new reduced pricing. The process uses proven technologies and techniques acquired from the G2.8 remanufacturing process. Each unit is 100% flow tested to ensure product operation and durability.

Installation Information:
Replacement of G2.9 Injectors requires removal of the high-pressure oil rail. The injector inlet seals are incorporated on the oil rail and must be replaced prior to reinstalling. Alliant Power kit AP0025 will provide the necessary seals and backup rings to reseal the rail properly.

All new products are backed with Alliant Power’s 13-month, unlimited mileage warranty, as well as Alliant Power’s
technical support.

AP Part NumberObsolete AP Part NumberYear RangeApplicationOEM Part Number
AP66992AP668922006DT570: 285 HP to 330 HP1848492C91
AP66995AP668952006HT570: 295 HP to 340 HP (HT)1848495C91

Jimmy Finch

Dallas Branch Manager, M&D Distributors

Jimmy Finch has over 33 years of experience in Diesel Engine Sales, Service and Repair. His experience started early in life at Texas Fuel Injection Service (an early acquisition of M&D) as a job with a means to an end. Somewhere in that 33 years this job turned into a fulfilling career. He started in the injector clean up department and has held practically every position leading up to his current role as Branch Manager of the Dallas, Texas location.

In his spare time, Jimmy enjoys spending time with his wife of 24 years, Priscilla. They are currently getting ready to make their way into the empty-nesters stage of life. He also enjoys the occasional hunting trip with friends and family and chasing down potential customers by the names off their trucks.

Leave a Reply

Your email address will not be published. Required fields are marked *

By posting a comment, you acknowledge and agree to M&D's terms and conditions.

Diesel Engine Parts

for Your Diesel Engine's Needs